Unique Motorsports

The Greddy E-Manage is a very powerful tuning tool that in it’s most basic form allows you to adjust the fuel. Where the E-manage really shines however is it’s ability to upgrade. With the Support Tool, you have a laptop programmable piggy back fuel tuner. What’s more is with the fuel injector harness, you get a 16X16 fuel table which can be controlled VIA laptop. You can also get timing control with the timing harness and even a pressure sensor for those who want even more tuning. It’s not quite a standalone, but pretty close, especially for the money.

Most of this info was updated when the E-Manage is installed and error free.

OK lets get started.

As with any automotive purchase, the first thing you should do is research. Read the FAQ in the following yahoo message group (http://autos.groups.yahoo.com/group/emanage/) as well as some of the messages, other installs, etc… The more research you do at this point, the less head scratching you will do later.
I have decided to break up the E-Manage into parts, this way if something should go wrong, I know where to look. For the First part, I just want the unit in the car. This will give me some minor fuel tuning but more importantly allow me to get familiar with the E-manage.

After doing all my research and laying out the parts, verifying the parts and doing some more reading, it’s time to get started. This is the ECU pinout for my 93 ECU, each car is different. I compared the ecu pinout with the wires that need to be installed for the E-Manage, highlighted everything, took notes and went back to the shop.

For other Subaru ECU charts go to www.ravensblade.com

(continue reading…)